Moog WERKSTAYY-01 Manual de usuario descargar pdf (Pagina 14)

VCF (VOLTAGE CONTROLLED FILTER)

VCA (VOLTAGE CONTROLLED AMPLIFIER)

CUTOFF (CUTOFF FREQUENCY KNOB)

TheCutoffknobspeciesthefrequencywheretheFilterisapplied.Turning

theknobtotherightwillopenthelter,allowingmoreharmoniccontenttobe

heard,creatingabrightersound.Turningtheknobtotheleftwillclosethelter,

causingmoreharmoniccontenttobeltered,creatingadarkersound.

RES (RESONANCE KNOB)

DirectingtheoutputofthelterbacktotheinputallowstheMooglterto

create a harmonic boost at the cutoff frequency. The amount of this boost, or

emphasis, is controlled by the Resonance knob. By increasing the Resonance

anddecreasingthecutoff,theWerkstattltercanbemadetoself-oscillate,

creating a sine wave that can be used as second audio sound source.

MODE (MODE SWITCH)

The VCA can function in one of two ways, controlled by the Mode switch.

ON: In this position, the VCA is always on, and the audio signal of the

Werkstatt is output continuously, all the time. This setting is great for when

youarecreatingsynthesizersoundsandeffectsthatneedtoplayforan

extended period, or droning sounds.

EG:EGisshortforEnvelopeGenerator.Whentheswitchisinthisposition,

theVCAiscontrolledbytheAttack,Sustain,andDecaycharacteristicsof

theEnvelopeGeneratorModule.

The Werkstatt uses the classic 24dB per

octaveMoogLadderlter.Thislow-pass

VoltageControlledFilter(VCF)selectively

shapes the timbre of the sound created

by the oscillator, by attenuating and/or

emphasizingcertainharmonicelements.

This section controls the output level of the

Werkstatt. As you may have noticed, there is

no Volume knob on the Werkstatt. The VCA

booststhenalaudiosignaltoasuitablelevel.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 28 29

Sin comentarios

Moog WERKSTAYY-01 Manual de usuario Pagina 14