Moog QSD SERIES Manual de instrucciones descargar pdf (Pagina 5)

Figure 3

Twist and

Secure

Wiring Color Code for Power

1 Camera Power (24Vac) Red

2 Camera Power (24Vac) Orange

3 Accessory Power (24Vac) Yellow

4 Accessory Power (24Vac) Green

POWER

1. Mount the housing assembly to the mounting bracket and housing coupling. A safety

cable is included with the housing to temporarily hold it while making wiring connections.

2. Clean the outside of the dome.

Use the formula below to select the correct

power supply for cameras connected in

parallel (positive to positive, negative to

negative):

Total current for a 24Vac system:

TOTAL CURRENT = (202mA x total

number of cameras) Example: 202mA x 5 total cameras = 1010mA

Note: 202mA is camera plus power supply

CAMERAS VOLTAGE CURRENT POWER

1 24Vac/Vdc 102mA 2.5W

2 24Vac/Vdc 210mA 5W

3 24Vac/Vdc 331mA 7.9W

4 24Vac/Vdc 487mA 10.9W

CABLE AND POWER GUIDELINES

This chart shows the proper current needed for power supplies for Q-View Series

cameras. Use Class 2 Power only. Input voltage must be

24Vac / Vdc.

CAMERAS TOTAL LOAD POWER SUPPLY 24 AWG 22 AWG 18 AWG 16 AWG

1 2.5W 24Vac/Vdc 1718/523 2733/833 6909/2106 10985/3348

2 5W 24Vac/Vdc 834/254 1327/404 3356/1023 5335/1626

3 7.9W 24Vac/Vdc 529/161 842/256 2129/649 3385/1032

4 10.9W 24Vac/Vdc 359/109 572/174 1447/441 2300/701

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Moog QSD SERIES Manual de instrucciones Pagina 5