Moog CamEvator SERIES Manual de usuario descargar pdf (Pagina 4)

GENERAL INSTRUCTIONS

1. Select an appropriate location for your IR (Infrared) illuminator.

NOTE: Generally the IR unit will be mounted near the camera.

2. Mount the IR10M using the bolt and washer provided. After aiming in the proper

direction, lock the unit down using a screw (not provided) in the second slot on

the bracket (Figure 1).

ILLUMINATOR SPECIFICATIONS

Model Power Distance Angle Wavelength

IR10M 12Vdc 33 ft (10m) 70° 840nm

Figure 2

Figure 1

Center hole for

mounting

Slot for lock down

screw

The male center pin is

2.1mm, the opening in the

female connector is 2.1mm

NOTE: Center pin is positive.

SPECIFICATIONS

Input Voltage 12Vdc, 450mA (+/- 10%)

Output Voltage 12Vdc

Distance 33 ft. (10 meters)

H.V. Angle 70˚

Power Consumption 2.0 watts

Power On DCS Auto Control

LED 28 unit Infrared LED

Wave 840 nM

Rating IP68

Construction Aluminum, with original anodized nish

Operating Temperature -4˚ F to 140˚ F

Weight 0.39 lbs.

3. Connect the unit to a 12Vdc power source (such as the Moog Videolarm PS12).

NOTE: Both a male and female 2.1mm connector are included for your

convenience (Figure 2).

1 2 3 4 5

Sin comentarios

Moog CamEvator SERIES Manual de usuario Pagina 4